Porsche 928

The Porsche 928 featured a large, front-mounted and water-cooled V8 engine driving the rear wheels. Originally displacing 4.5 L and featuring a single overhead camshaft design, it produced 219 hp (163 kW/222 PS) for the North American market and 240 PS (176 kW/237 hp) in other markets. Porsche upgraded the engine from mechanical to electronic fuel injection in 1980 for US models, although power remained the same. This design marked a major change in direction for Porsche (started with the introduction of the 924 in 1976), whose cars had until then used only rear- or mid-mounted air-cooled flat engines with four or six cylinders. Porsche engineers wanted a large-displacement motor to power the 928, and prototype units were built with a 5.0 L V8 producing close to 300 hp (220 kW). Very early units used one four-barrel carburetor, which was eventually tossed in favor of Bosch’s K-Jetronic fuel injection system. When increasing concern within the company over the pricing and availability of fuel during the oil crisis of the 1970s became an issue of contention, smaller engines were considered in the interest of fuel economy. Some managers began pushing for development of a 3.3 L 180 hp (130 kW) powerplant they had drawn up specs for, but company engineers balked at this suggestion. Both sides finally settled on a 4.5 L, SOHC 16-valve V8 producing 240 PS (237 hp/177 kW) (219 hp (163 kW) in North America), which they considered to have an acceptable compromise of performance and fuel economy.